http://forums.dvdfile.com/attachment...chmentid=10798
This picture shows the first panel wrapped with fabric, and getting ready to be anchored to the floor. You can also see the blackout cloth over the window in the front of the room. There is a nice looking drape hanging inside of the window so it's not too ugly from the outside too
http://forums.dvdfile.com/attachment...chmentid=10799
Gratuitous shot of the screen... waiting to be hung...
http://forums.dvdfile.com/attachment...chmentid=10800
This is a shot of the middle panel and the right hand side panel lag screwed to the subflooring and bolted together...
http://forums.dvdfile.com/attachment...chmentid=10801
Here are all of the center 3 panels anchored together, to the floor, and to the ceiling...
http://forums.dvdfile.com/attachment...chmentid=10802
Here is a shot of the back of the panels. If you look closely you can see the lag screws at the bottom, and the bolt holding the two panels together.
http://forums.dvdfile.com/attachment...chmentid=10803
Here are the left and right flanking panels (they'll be fastened about 12" out into the room from the center panels). The equipment will fit in a hole at the base of the leftmost panel. The subwoofers will sit behind the right panel.
The white marks are dabs of tape that will approximate where the screen will be mounted.
----------------------------
Attachments below are the same as the linked images above.